Kesla最大のグラップルは、トラックに搭載されたクレーンや産業用クレーン用に設計されています。材木、バイオエネルギー材料の取り扱いや特殊な用途に最適です。グラップルは最高の性能を発揮し、耐用期間が長くなるように設計されています。
材木グラップルには、「proG」の文字がマークされています。これらのグラップルは、木の幹の取り扱いに最適です。
バイオエネルギーグラップルには、「proGE」の文字がマークされています。エネルギー木材の取り扱いに最適です。
小型グラップルは、当社の「ハーベスタヘッド」の製品カテゴリーからご覧いただけます。
Tässä 316T-kuormaimessa on erinomainen ajotuntuma ja voimaa kuin metsäkonenosturissa.
Topi
Tätä PATUa ei ole tarvinnut hitsailla jälkikäteen, vaikka se on ollut kovalla käytöllä jo kaksitoista vuotta.
Jyrki
316T-kuormaaja, jota testasin, liikkui todella pehmeästi ja herkästi. Tuntui siltä, että olisi helppo oppia työskentelemään sen kanssa.
Jukka
This 316T has as good contact and power as in a forest machine crane.
Topi
This PATU has not needed any after-welding although it has been in active use for 12 years.
Jyrki
The 316T loader I test drove, was moving very softly and sensitively. I feel it would be very easy to learn to work with this loader.
Jukka
Yes, excavator equipment and profile- or drainige buckets are available for loaders up to 203T.
The ones in the brochure are not but we have similar type of gravel buckets available also for our older grapples in our spare parts and also for your grapple.
Quite small tractor (60-80 hp, 2500 kg) is good when you are working with a crane that is mounted on the trailer. Oil flow is a critical thing. Minimum oil flow needed for our smallest crane model KESLA 211 is 25-40 l/min. Bigger cranes will need more oil flow. For example KESLA 304T works properly with 40-70 l/min or with LS 100-130 l/min. Powerful oil flow is important for good control of the crane.
If you mount a KESLA crane on JAKE-frame or 3-point hitch your tractor's weight should be at least 3 500 kg. That is minimum weight for KESLA 200-series cranes and 200-series cranes are possible to mount on the 3-point hitch. With KESLA 300-500 –series cranes tractors weight has to be 4 000 or more. JAKE-frame is the best option for tractor mounted crane.
For crane control we have manual, servohydraulic and electrical control systems. With all of those you can operate properly inside the tractors cabin. Servohydraulic and electrical controls are the easiest for the mounting.
Main purpose is to lift logs from narrow places, like transport chains on the saw mills. It can also be used in skidder cranes.
Kysymyslomake