El cabezal telescópico KESLA 25SH con alimentación por pistones demuestra su potencial cuando se procesan árboles muy ramosos – en pie o en ya en pilas de madera - siempre que se requiera una fuerza de desrame sustancial. La tecnología del cabezal telescópico se asegura que la superficie del árbol no se dañe, lo que facilita el manejo suave de la madera valiosa o para desenrollo. El cabezal 25SH puede apear y cortar a medida los árboles en pie, así como procesar árboles enteros previamente volteados. El diámetro óptimo del árbol es de 40 cm.
Las combinación única de las mandíbulas de alimentación y las cuchillas de desrame dan aún más fuerza para manejar árboles pesados y mejorar la calidad de desrame. Gracias a la función de recorrido parcial del telescópico proSTROKE, incluso el desrame de los árboles torcidos es eficiente. El KESLA 25SH adapta a máquinas base de 10-15 toneladas.
日々のメンテナンスを快適に行えるよう特別に設計されています。KESLAハーベスタヘッドは十分なクリアランスを確保した構造のため、注油やホース類の交換も手軽に行えます。
KESLAハーベスタヘッドはユーザーのニーズに応じてカスタマイズされています。多彩なオプションパーツとアクセサリをお選びいただけるため、ご希望にぴったりのヘッドが見つかります。
KESLAハーベスタヘッドは市販のコントロールシステムとも交換可能です。またコストパフォーマンスに優れたproLOGシステムの別バージョンもご用意しています。
ほとんどのパワーショベルに適合するハーベスタヘッドに加え、取付けサービスや多彩なアクセサリ類もご用意しています。ユーザーが選べるオプションパーツには、油圧用補助キットや測長システム、エクステンダーブームや各種安全装置などがあります。
すべてのKESLAハーベスタヘッドフレームは、スチールプレートを溶接した頑丈な一体化構造を実現しています。フレームにボルトは一切使われていません。シンプルなデザインと剛性の高いスチールを組み合わせることで、軽量ながらも極めて頑丈な構造を実現しています。ピボットは溶接後に加工され、軸と軸受けは寸分の狂いなく組み合わされています。
緻密に設計されたバランス構造と重心近くに通したチルトによって、KESLAハーベスタヘッドは安定してチルトアップ・チルトダウンすることが可能です。木材を掴むのも簡単で、バランスの取れたプロセスポジションが適切な力加減の安定した枝払いを実現します。
KESLAハーベスタヘッドには業界最高レベルのダブル送材ローラーが装備されています。モーターを2機しか搭載していないため構造がシンプルで、卓越したパワーウエイトレシオを引き出しています。また油圧抵抗値も減少しているため、少ない燃料で高い送材力とスピードを実現しています。可変式の画期的なローラーリンクと油圧式アンチスリップシステムで、グリップ力と牽引力にも妥協はありません。摩擦抵抗を最小化するため小径の木材はローラーの間に挟みこみ、大径木材はローラー自体が重量を支えることによってグリップ力を最大化します。
Modelo | Kesla 25SH-II |
---|---|
Ancho, con las garras abiertas (mm) | 1030 |
Ancho con las garras cerrada (mm) | 1015 |
Longitud (mm) | 1570-2420 |
Altura (sin rotador) (mm) | 1450 |
Peso (sin rotador) (kg) | 920 |
Diámetro de corte máximo (mm) | 670 |
Alimentación (rollers/stroke) | telescópica |
Fuerza de alimentación (kN) | 65 |
Número de cuchillas (pcs) | 4 móviles + 1 fija |
Diámetro de corte (entre filos opuestos) (mm) | 390 |
Apertura máx. de cuchillas frontales (mm) | 600 |
Apertura máx. de cuchillas posteriores (mm) | 720 |
Presión (bar) | 175-210 |
Caudal requerido (l/min) | 120-180 |
Potencia requerida (kW) | 40-75 |
Stroke harvester suits also onto smaller basemachines, like diggers, which hydraulic oil flow would not be high enough for roller heads. Even with relatively low oil flow, stroke feed creats feed efficient enough to cut and delimber relatively big tree trunks. The product itself is produced of the same high quality materials than the roller heads. The measuring device is a part of standard delivery and equivalent to that of roller heads. The SH-heads are very widely used throughout the world.
Depending on the harvester head model, the new saw unit utilises a 34cc or 40cc Sunfab motor and 22-tooth drive wheel that enable a sufficient chain speed to be reached at approximately 5,500 rpm. The low-rpm, high-capacity motor is much more durable in use than traditional solutions and operates at much better efficiency. In practice, this manifests itself as better sawing power and lower fuel consumption.
In addition to the fuel savings, the technical solutions of the R5500 saw unit result in lower operating and maintenance costs: The saw unit utilises wide Iggesund JW-series saw bars, whose life span is many times that of traditional bars. The robust and wide saw bar bends and vibrates less, which, together with an efficient tensioner, ensures that the chain stays on in all sawing situations. The new double-sided and balanced drive wheel is designed to last for the entire service life of the harvester head.
The JPS R5500 is a compact package that does not require external saw cylinders or position sensors. The saw bar motion is driven by a turning mechanism integrated into the unit, which also includes sensors that detect the position of the saw.
According to the studies, it also produces substantially less cutting-induced crack than its traditional counterparts.
Formulario de preguntas