KESLA proSTABILITY R
The radio controlled crane is a convenient solution for short but demanding loadings where high-accuracy is needed. The control system is a Scanreco-radio control unit. The visibility to the crane tip is excellent as well as the connection to the stability system.
KESLA proSTABILITY control system
Kesla has developed a stability control system for the City cranes, proSTABILITY. The system enables the radio control of the crane, but it is also available for top seat equipment. The system alerts the driver about factors that impact stability, such as overload, inclination of the truck or if the vehicle loses ground contact. In addition, it prevents functions that increase the lifting torque in extreme conditions. The system shows several crane status data including sensor faults, fault log, the position of the stabilizer and crane as well as lift capacity in that position. The system also offers the possibility to a limited lift sector without stabilizer legs.
KESLA proSTABILITY E
The system is also available with a top seat equipment and with joysticks. This alternative is especially suitable for longer work periods and high speeds. The visibility from the top seat is good.
製品
No results with current selections
画像
特徴
KESLA proSTABILITY
Kesla has developed a stability control system for the City cranes, proSTABILITY. The system enables the radio control of the crane, but it is also available for top seat equipment. The system alerts the driver about several factors that have impacts on stability, for instance for overload, inclination of the truck or if the vehicle loses ground contact. In addition, it prevents functions that increase the lifting torque in extreme conditions. The system shows several crane status data including sensor faults, fault log, the position of the stabilizer and crane as well as lift capacity in that position. The system also offers the possibility to a limited lift sector without stabilizer legs.
Customer feedbacks
Tuntumaa ja voimaa
Tässä 316T-kuormaimessa on erinomainen ajotuntuma ja voimaa kuin metsäkonenosturissa.
Topi
Kestävyys
Tätä PATUa ei ole tarvinnut hitsailla jälkikäteen, vaikka se on ollut kovalla käytöllä jo kaksitoista vuotta.
Jyrki
Pehmeä ja herkkä
316T-kuormaaja, jota testasin, liikkui todella pehmeästi ja herkästi. Tuntui siltä, että olisi helppo oppia työskentelemään sen kanssa.
Jukka
Contact and power
This 316T has as good contact and power as in a forest machine crane.
Topi
Durability
This PATU has not needed any after-welding although it has been in active use for 12 years.
Jyrki
Soft and sensitive
The 316T loader I test drove, was moving very softly and sensitively. I feel it would be very easy to learn to work with this loader.
Jukka
Category FAQ
Can KESLA-loaders be used as excavator?
Yes, excavator equipment and profile- or drainige buckets are available for loaders up to 203T.
Are the gravel buckets suitable for my old KESLA 18 grapple (year 2010)?
The ones in the brochure are not but we have similar type of gravel buckets available also for our older grapples in our spare parts and also for your grapple.
How large does a tractor need to be for a KESLA-loader? With Jake-type frame? On a 3-point hitch? How is the loader operated from the tractor cabin?
Quite small tractor (60-80 hp, 2500 kg) is good when you are working with a crane that is mounted on the trailer. Oil flow is a critical thing. Minimum oil flow needed for our smallest crane model KESLA 211 is 25-40 l/min. Bigger cranes will need more oil flow. For example KESLA 304T works properly with 40-70 l/min or with LS 100-130 l/min. Powerful oil flow is important for good control of the crane.
If you mount a KESLA crane on JAKE-frame or 3-point hitch your tractor's weight should be at least 3 500 kg. That is minimum weight for KESLA 200-series cranes and 200-series cranes are possible to mount on the 3-point hitch. With KESLA 300-500 –series cranes tractors weight has to be 4 000 or more. JAKE-frame is the best option for tractor mounted crane.
For crane control we have manual, servohydraulic and electrical control systems. With all of those you can operate properly inside the tractors cabin. Servohydraulic and electrical controls are the easiest for the mounting.
What purpose is proG20P grapple planned for?
Main purpose is to lift logs from narrow places, like transport chains on the saw mills. It can also be used in skidder cranes.
Question form
