KESLA City Z-cranes
There are many tastes, but in City cranes, bodybuilding solutions usually require either a straight boom crane or a Z-crane. The Zboom crane can be installed either behind the cabin of the truck or on the rear of the trailer. The best part of the Z-crane is space-saving transport position.
画像
特徴
多彩なKESLA proGグラップルシリーズ
グラップルのシリーズには丸太用や木質バイオエナジー用など様々なサイズがあります。幾何学的なグラップル部は入念に設計されており、１本の丸太でも何本もの束でも問題なく掴むことができます。高い耐久性とデザインがグラップル部の長寿命を約束します。
ワイドアングルジョイント
ワイドアングルジョイントによってブームがどの位置にあっても安定した吊り上げ力を発揮します。
KESLA proSTABILITY
Kesla has developed a stability control system for the City cranes, proSTABILITY. The system enables the radio control of the crane, but it is also available for top seat equipment. The system alerts the driver about several factors that have impacts on stability, for instance for overload, inclination of the truck or if the vehicle loses ground contact. In addition, it prevents functions that increase the lifting torque in extreme conditions. The system shows several crane status data including sensor faults, fault log, the position of the stabilizer and crane as well as lift capacity in that position. The system also offers the possibility to a limited lift sector without stabilizer legs.
Well-protected hoses
The hydraulic hosing is well protected inside the boom.
スルーシステム
全てのモデルにオイルバス付きキャストスルーシステムを搭載しています。
リフティングシリンダーガード
大型モデルに標準装備
Booms made of high quality steel
The booms of KESLA City cranes are made of Strenx MC700MC+ steel.
Customer feedbacks
Tuntumaa ja voimaa
Tässä 316T-kuormaimessa on erinomainen ajotuntuma ja voimaa kuin metsäkonenosturissa.
Topi
Kestävyys
Tätä PATUa ei ole tarvinnut hitsailla jälkikäteen, vaikka se on ollut kovalla käytöllä jo kaksitoista vuotta.
Jyrki
Pehmeä ja herkkä
316T-kuormaaja, jota testasin, liikkui todella pehmeästi ja herkästi. Tuntui siltä, että olisi helppo oppia työskentelemään sen kanssa.
Jukka
Contact and power
This 316T has as good contact and power as in a forest machine crane.
Topi
Durability
This PATU has not needed any after-welding although it has been in active use for 12 years.
Jyrki
Soft and sensitive
The 316T loader I test drove, was moving very softly and sensitively. I feel it would be very easy to learn to work with this loader.
Jukka
Category FAQ
Yes, excavator equipment and profile- or drainige buckets are available for loaders up to 203T.
The ones in the brochure are not but we have similar type of gravel buckets available also for our older grapples in our spare parts and also for your grapple.
Quite small tractor (60-80 hp, 2500 kg) is good when you are working with a crane that is mounted on the trailer. Oil flow is a critical thing. Minimum oil flow needed for our smallest crane model KESLA 211 is 25-40 l/min. Bigger cranes will need more oil flow. For example KESLA 304T works properly with 40-70 l/min or with LS 100-130 l/min. Powerful oil flow is important for good control of the crane.
If you mount a KESLA crane on JAKE-frame or 3-point hitch your tractor's weight should be at least 3 500 kg. That is minimum weight for KESLA 200-series cranes and 200-series cranes are possible to mount on the 3-point hitch. With KESLA 300-500 –series cranes tractors weight has to be 4 000 or more. JAKE-frame is the best option for tractor mounted crane.
For crane control we have manual, servohydraulic and electrical control systems. With all of those you can operate properly inside the tractors cabin. Servohydraulic and electrical controls are the easiest for the mounting.
Main purpose is to lift logs from narrow places, like transport chains on the saw mills. It can also be used in skidder cranes.
Question form
