The KESLA A-frame stabilizer legs are very sturdy. The cylinders are completely protected inside the stabilizer leg equipment. The stroke length of the stabilizer legs is sufficient even when mounted on high trailers, without limiting ground clearance of the trailer (stabilizer legs in upper position). Weight of the stabilizers is 302 kg.

KESLA winch significantly increases a loader’s reach. A radio-controlled control system facilitates, for example, the dragging of tree trunks at distances of up to 40 metres. Precise radio-control ensures that working the winch is safe. The KESLA winch is also extremely useful in felling trees at difficult and dangerous places. All KESLA 200 and 300 Series loaders are prepared for winch installation as part of the standard delivery.

The KESLA-excavation boom equipment turns your KESLA-loader into an efficient excavator. Installing the excavation equipment is quick and easy, thanks to the hydraulic quick-release attachments. Choose separately a V-bucket or drain bucket for the boom.

For the KESLA excavator equipment there is a V bucket available. The tip of the bucket has 2 tonnes of breaking force. Installing the excavation equipment is quick and easy, thanks to the hydraulic quick-release attachments.

For KESLA excavator equipment there is a drain bucket available. The tip of the bucket has 2 tonnes of breaking force. Installing the excavation equipment is quick and easy, thanks to the hydraulic quick-release attachments.

KESLA loader’s boom or pillar can be fitted with working lights. Thanks to the powerful working lights, working without daylight is not a problem.

Special colour for the loader. The special colour can be chosen freely from RAL colour chart.

The KESLA 40LF/e stroke delimber combined with a KESLA loader is an efficient and reliable tool for delimbing, cutting and stacking timber. KESLA 40LF/e can be installed on the A support leg of KESLA 200 series loaders, KESLA forest trailers, or a three-point lifting device on a tractor. The control valve of the 40 LF/e is integrated into the stroke delimber, and the controls can be handled from the tractor cabin using a single joystick. This facilitates installation and provides a significant improvement to work ergonomics.

Mounted on KESLA timber grapples, the gravel bucket is suitable for loading soil or clearing ditches. Thanks to the narrow shape of the tip, the bucket sinks well into the ground. Connecting and disconnecting the bucket is quick and easy.

Mounted on KESLA timber grapples, the material gripper is well suited to the handling of chopped firewood, rocks, tree stumps, fresh feed, dry hay and other similar materials.

Sturdy KESLA telescopic stabilizers are suitable for almost all KESLA loaders. The stroke is long enough even with higher trailers. The support-width legs down is approximately 3 m. LS-hydraulic pump can be installed inside the stabilizers.

Sturdy KESLA-Flapdown stabilizers are suitable for almost all KESLA loaders. Length of the stabilizer legs can be adjusted and the support-width when down is up to 5 m. For the most difficult terrains there are additional integratable plates and cylinder guards available. LS-hydraulic pump can be installed inside the stabilizers.

KESLA bale claws suit KESLA proG25 and proG26 wood grapplers. They allow the moving of round bales without breaking the protective plastic covering.

The KESLA 19GX felling head is designed for felling and loading energy wood. Its straightforward structure and operating principle make it extremely dependable. The felling head is easy to install and no additional hosing or wiring is required. The device has an ingenious integrated TILT feature, which gives the operator full controll of felling. The TILT-function is controlled by simultaneously activating rotator and grapple open/close functions. The felling head’s blade is easy to fold away, after which the head can be used for loading just like a normal grapple.

The KESLA 300X-grapple is suitable for loaders with a lifting power of 10–45 kNm (KESLA 211-305T). It is suitable for both tractors and small forwarders as well as excavators under 8 tonnes. It is an excellent, versatile grapple for loading firewood, soil, hay, bales, or brushwood. For example, the grapple can hold 0.3 m3 of firewood. Mounting directly to FR7-rotator (50 mm axle) and FR10-rotator (60 mm axle).

Additional hydraulic unit, which can be installed in a KESLA-loader, give great circumstances to work even without tractor hydraulics. Unit gives power to both loader and trailer's drive. HD-pump can be placed whether on tractor's PTO or on tractor's drawbar. The oil tank is placed in trailer's front screen.

The new KESLA LS additional hydraulic pump is installed inside the new stabilizers (flapdown or telescopic) on the drawbar of a 102- or 122 trailer. Trailer drive, loader, stroker delimber or energy grapple can all be controlled by the same pump. Maximum oil flow 150 l/min (600 rpm). Maximum work pressure 280 bar. Oil tank of 110 litres, equipped with oil level and oil temperature sensor (accessory).